Industrial Ro Controller

Product Details:

•           REAR TERMINAL STRIP for ease of wiring

•           USER SETABLE All timings are setable at site

•           User setable frequency for SLUDGE DRAINING

•           16X2 ALPHANUMERIC DISPLAY TO SHOW

pump/blower status & timing

•           AUTOMATIC SWITCH OVER to stand-by pump/blower

•           REMEMBERS TIME ELAPSED & STARTS FROM THE POINT WHERE POWER FAILURE HAPPENED

• SEPARATE RELAY for control which can be locked after specific operation hours

• 4 SWITCH INPUTS

-Effluent tank level

-MBR Tank level

-Blower input

-Remote Fault

•        TWO FLOW INPUTS

•        TWO CURRENT INPUTS (can be used for pH/ORP/DO)

•           MIMIC DIAGRAM with 8 bright LEDs for better understanding

•           RS 485 OUTPUT

Product Details:

•  Complete RO OPERATING LOGIC in-built

•  SUITABLE FOR RO PLANT OF ANY CAPACITY 

•  2 Line ALPHANUMERIC DISPLAY to show plant status and parameters 

•  MIMIC DIAGRAM with 8 LED annunciator

•  5 KEY BUTTONS to make operating easy

•  AUTOMATICALLY FLUSHES the membrane during starting, stopping and after a set period

•   AUTO/MANUAL FACILITY

•   IN BUILT FLOW RATE INDICATOR WITH TOTALISER 

•   IN BUILT OPERATION HOUR COUNTER 

IN BUILT CONDUCTIVITY/TDS INDICATOR

•   Equipped to SUIT AUTO-MULTIPORT VALVE in pre-treatment

•   PASSWORD PROTECTED settings

•    EASY WIRING  through rear terminal strip

•  5 SWITCH INPUTS: 

1. RWT level or ORP or Transfer Pump Input

2. Low Pressure Switch

3. High Pressure Switch

4. TWT level

5. Dosing Tank low level or Remote Fault or Transfer Pump Input

•  4 POTENTIAL FREE OUTPUTS:

1.  RW Pump

2.  HP Pump

3.  Flush Valve

4 Alarm or Transfer Pump

•  ACCESSORY AS REQUIRED:

1  Flow sensors

2  Low Level Switch 3 Floaties (2)

4 Low Pressure Switch

 

Product Details:

 

KEY ATTRIBUTES

•  REAR TERMINAL STRIP for ease of wiring

• UNIVERSAL Suitable for any logic & for all types of UF membranes

 

• USER SETABLE Upto 10 valves & 2 pumps programmable at site All timings are setable at site

 

•  Can program up to 30 steps

•  User setable frequency for CEB & BACKWASH CYCLES

• Setable pump ON & pump OFF delay AVOIDS WATER HAMMERING

•  6 SWITCH INPUTS

-RWT level

-TWT level

-Dosing Tank Level

-TW low level

-Pressure input

-Remote Fault

•  ONE FLOW INPUT (with in-built totaliser)

•16X2 ALPHANUMERIC DISPLAY to show step number, step name & timing

•  SEPARATE LED for every input & output

• Can be used even for MB AUTOMATION/ FILTER/ SOFTENER AUTOMATION

 

Product Details:

Microprocessor based valve controller VC-550 to make any solenoid valve “Automatic”. The VC-550 provides acontinuous “Valve-On” state and remains in this state until set time is over to switch to “Valve Off” mode. Logicfor Filter, Softner, SBA, SAC are preprogrammed with all timing setteble at site for user convenience.

WHY CHOOSE US

•           Universal Can be used for Filter, Softner, SBA, SAC automation

•           USER SETTABLE All timings are settable at site

•           REGENERATION CAN BE INITIATED BASED ON TIME OR VOLUME OR PULSE

•           SETTABLE OUTPUT ON DELAY avoids WATER HAMMERING

•           16*2 ALPHANUMERIC DISPLAY to show step name & timing

•           Weather proof ABS ENCLOSURE WITH IP-65 protection

•           UNIQUE ENCLOSURE DESIGN suitable for field as well as panel mount applications.

•           EASY SETTING using front keys

•           PASSWORD PROTECTION for all settings.

•           REAR TERMINALS for ease of wiring, covered with HINGE COVER

•           TWO SWITCH INPUTS RWT Level & TWT Level

•           ONE FLOW INPUT (with Batcher)